Current time: 06-20-2018, 06:14 AM Hello There, Guest! (LoginRegister)


Current time: 06-20-2018, 06:14 AM



Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
A ceiling fan there
05-17-2018, 11:55 PM
Post: #1
Big Grin A ceiling fan there
So Im sitting in the kitchen in the center of the afternoon getting ready to watch a baseball game, I've the range using the mini hotdogs, getting ready to stay in when it happened...Im perspiration!

Thats when I made a decision to install a ceiling fan. A ceiling fan offers many functional benefits while putting a certain decorative touch to a space. In the summer it will also help cool a space (or possibly a deck). In the winter it could be used at low speeds to distribute warmer air that has risen up to roof level.

What-ever your reason for adding a ceiling fan, you will find it to be a comparatively simple project particularly if you'll be replacing a light fixture in the middle of an area (each of the wiring will already be there). Almost certainly your greatest obstacle would have been a new workbox that is approved for the weight of an overhead fan or adding support to a current workbox, a workbox that is perhaps not approved for roof fan weight can lead to disaster!

When changing a current light general installations are covered by the following instructions. It'll give a notion to you of what is needed for the task. Be sure you evaluate and follow directions which can be unique to the lover you obtain. Browse here at return to site to discover where to allow for it. Based on your installation needs, you will need to purchase a longer down pole for cathedral ceilings or purchase an optional light kit if it is not involved.

1) Turn off the circuit by switching off the breaker. Eliminate the existing ceiling fixture. Identify further about recessed ceiling led by browsing our dynamite wiki.

2) Determine if enough support will be provided by your existing workbox. Check to see if the workbox has metal mix braces that course between two joists, if you've access to the workbox from your own basement. Or even, it is possible to cut a 2x4 to match among the joists. Deploy it so it touches the top of the workbox. Anchor the wood in-place. In the area, use 1 drywall screws to anchor the box towards the wood brace.

3) If you don't have access from the loft, you can put in a metal cross brace through the rough opening in your roof and then attach an accepted workbox to-the metal brace.

4) I hate this part! Build the ceiling fan based on the companies provided guidelines. When you are ready-to hold the fan, get the mounting bracket and install it for the ceiling workbox. Some fans have a hanging figure which allows one to lift the ball end of the down pole in place. Others feature a class that supplies a J lift that allows you to hang the engine housing while hooking up the wiring

5) In the event that you removed a light fixture in the ceiling, probably the prevailing wiring provides one turned world to your new ceiling fan. What this means is the wall switch will are the master switch to show the system off and on. The pull string on the fan will also get a grip on the fan (and its speed). Should you install an optional light package about the lover, both the wall switch and a pull string will also get a grip on it.

6) After the wiring diagram provided with the fan, connect the wires using wire nuts. Almost certainly this is as simple as connecting the 2 black wires; connecting the 2 white wires and connecting the 2 ground wires.

7) After the fan is sent, finish its assembly based on the particular manufacturers directions. You'll need to install the cover to the top-of the pole.

8 )You will even need to connect the fan blades. If you are installing a light kit, remove the cover on the bottom of the fan where the light kit will be mounted. If you are interested in operations, you will maybe wish to learn about No More Boring Ceilings 26505. Visit The advantages of Adding a Ceiling Medallion to explore the purpose of this viewpoint. Following a manufacturers guidelines, build and install the light set.

Now you're ready-to begin enjoying your ceiling fan and switch the breaker on..
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Tong Yuan | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication